Connecting to Averett's Wireless Network

You must have a Wireless Ethernet card (802.11b/g or 802.11b/g/n, also known as WiFi or Airport Card) to use the wireless network. Wireless networking provides the convenience of being able to connect just about anywhere on the Averett University Main Campus.

To use the wireless network, position your notebook within range of a wireless access point. You should be able to connect at least 100 feet away from a wireless access point, but if you are having trouble there may be interference from people or devices in the area, try moving to a different spot. If you are using a removable wireless card (not built in), insert it before you turn on your computer.

These instructions must be completed while in an area that is covered by the Averett University Wireless Network.

Part 1

To make sure your laptop meets requirements:

1. Remove the Ethernet cable if one is plugged into your laptop.

2. Make sure you are currently in an area of the AverettUniversity campus with wireless network service.

** The following instructions are based on the Window Wireless Management console that is built into Windows XP. Your wireless card may have its own management utility that you will need to use. The guide still contains the information you will need, however, the steps will be different.

Part 2
To configure and enable the wireless network connection:

1. Click Start, then right-click on My Network Places (in Classic view, right-click on the My Network Places icon on the Desktop). Select Properties from the drop-down list.

2. The Network Connections window will open with a list of connections for your laptop. Under the heading LAN or High-Speed Internet you should see a Wireless Network icon.

3. Right-click on Wireless Network Connection and select View Available Wireless Networks from the drop-down list.

Note: If View Available Wireless Networks does not appear in the list, select Enable from the drop-down list. Then right click on the Wireless Network Connection icon again and select View Available Wireless Networks.

4. The Wireless Network Connection window will open. Under the heading "Choose a wireless network", click AU-Portal. Click the Connect button.

Note: AU-Portal is the only official collection of access points located around Main Campus for the Averett University Network.

5. Open Internet Explorer or any other web browser and attempt to visit a webpage. You will be redirected to the Averett Wireless Authentication page.

6. Enter your Averett University username and password that you were issued for access to our online systems. You will not have public internet access until you have completed this step.

7. If you are validated, your browser will redirect you to your home page and you are now connected to Averett's Wireless Network. All current students, faculty and staff are authorized to use our network. If you have problems, please fill out an online work order.